The Learning Curve of Contact Printing
A little explanation of terms is probably in order. So far, I’ve mostly used cotton, which requires some special treatment before you dye or print with natural materials. A mordant is a substance that fixes or influences the color that is imparted onto the fabric. Without which, you won’t get any color to remain on the fabric. It can also brighten or dull your colors and helps to make it lightfast. It may also give the cloth some color of its own. Although many factors influence the process of color take up, we’re going to keep it simple here, as I am while I learn. Before we move into the particulars of this batch, it is an over-dye of a previously failed print. However, I like the depth it gives to the piece.
The first 2 pictures are different sections of the same piece of fabric which went through a couple of stages. First,I mordanted with alum, soda ash and soymilk. I’ve also used a tannin, which are also fixatives and help to increase colorfastness. Here, I used acorn milk. I made the soymilk and the acorn milk from scratch. Before setting it up I sprayed it with water and after composing the leaf arrangement, I covered it with an “iron water blanket” which is another piece of cloth that I dipped in rusty water and wrung out before covering the fabric I just layed out. To bundle, I rolled it up on a birch log and tied it up with twine. I then stashed it in the freezer until I was ready to put it in a pot. I simmered it in a pot for about 2 and a half hours and let it cool down before removing it from the pot and placing it aside for a couple of days.
I’m still learning about what to mordant with which so don’t think there’s anything fixed here about my methods. I’m experimenting to see what works best for me. I do love the Printing Nature FB group where I learn a lot of what I know so far.
Check out what’s happening on Nina Marie’s!